Drip Watering System with Timer (Kit)

Water your beds on autopilot.

A tap timer runs the water for you: a short drink every day, or every second day, whatever you set. No more remembering, and no coming home from holidays to a sad-looking garden.

How it works

The timer screws onto your tap. Your garden hose runs from the timer to the bed and clicks onto our connector. From there a 4mm tube feeds a weeper loop that sits inside the bed, under your mulch, and seeps water right at the roots. The timber and leaves stay dry and nothing is lost to wind or overspray.

What's in the kit

• Holman 2-dial tap timer with a 9V battery
• Hose click connector
• 2m feed tube and a 2.85m weeper loop per bed, joined and ready to lay
• 2 pins per bed to hold the loop in place
• 2 to 4 bed kits: a tee to split the line to each bed, plus an in-line tap on every bed so you can even out the flow. The bed nearest the tap otherwise gets the most water.

You supply the garden hose from the tap to the beds.

Setting it up

The kit clicks together and it's a DIY job. Scan the QR code on the pack, or follow our setup guide, for step-by-step instructions and how often to run it. Little and often beats one big soak.

For 3 or 4 beds, bring the hose in at the middle so the line splits both ways.

High water pressure or beds a long way apart? Get in touch before you order and we'll sort out what you need.

Not sure a tap timer is right for you? Compare all three ways to water a bed automatically.